Stress and Strain
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369947 A mild steel wire of length \(2\;L\) and crosssectional area A is stretched well within elastic limit, horizontally between two pillars as shown in figure. A mass \(m\) is suspended from the mid point of the wire. Strain in the wire is
supporting img

1 \(\dfrac{x^{2}}{2 L^{2}}\)
2 \(\dfrac{x}{L}\)
3 \(\dfrac{x^{2}}{L}\)
4 \(\dfrac{x^{2}}{2 L}\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369948 If the angle of shear is \(30^{\circ}\) for a cubical body and the change in length is \(250\;cm,\) then the original length of cube is

1 \(4.9\;m\)
2 \(5.5\;m\)
3 \(5.3\;m\)
4 \(4.3\;m\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369949 A man grows into a giant such that his linear dimensions increase by a factor of 9 . Assuming that his density remains same, the stress in the leg will change by a factor of :

1 \(\dfrac{1}{9}\)
2 81
3 9
4 \(\dfrac{1}{81}\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369950 Match the Column I (stress) with Column II (characteristic) and select the correct answer from the codes given below.
Column I
Column II
A
Longitudinal stress
P
Independent of area of cross-section of wire
B
Shear stress
Q
Change in pressure
C
Breaking stress
R
Length of wire increases or decreases
D
Bulk stress
S
Shape changes

1 \(A - R,\,\,\,B - S,\,\,\,C - Q\,\,\,D - P\)
2 \(A - S,\,\,\,B - R,\,\,\,C - P\,\,\,D - Q\)
3 \(A - R,\,\,\,B - S,\,\,\,C - P\,\,\,D - Q\)
4 \(A - P,\,\,\,B - Q,\,\,\,C - R\,\,\,D - S\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369947 A mild steel wire of length \(2\;L\) and crosssectional area A is stretched well within elastic limit, horizontally between two pillars as shown in figure. A mass \(m\) is suspended from the mid point of the wire. Strain in the wire is
supporting img

1 \(\dfrac{x^{2}}{2 L^{2}}\)
2 \(\dfrac{x}{L}\)
3 \(\dfrac{x^{2}}{L}\)
4 \(\dfrac{x^{2}}{2 L}\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369948 If the angle of shear is \(30^{\circ}\) for a cubical body and the change in length is \(250\;cm,\) then the original length of cube is

1 \(4.9\;m\)
2 \(5.5\;m\)
3 \(5.3\;m\)
4 \(4.3\;m\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369949 A man grows into a giant such that his linear dimensions increase by a factor of 9 . Assuming that his density remains same, the stress in the leg will change by a factor of :

1 \(\dfrac{1}{9}\)
2 81
3 9
4 \(\dfrac{1}{81}\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369950 Match the Column I (stress) with Column II (characteristic) and select the correct answer from the codes given below.
Column I
Column II
A
Longitudinal stress
P
Independent of area of cross-section of wire
B
Shear stress
Q
Change in pressure
C
Breaking stress
R
Length of wire increases or decreases
D
Bulk stress
S
Shape changes

1 \(A - R,\,\,\,B - S,\,\,\,C - Q\,\,\,D - P\)
2 \(A - S,\,\,\,B - R,\,\,\,C - P\,\,\,D - Q\)
3 \(A - R,\,\,\,B - S,\,\,\,C - P\,\,\,D - Q\)
4 \(A - P,\,\,\,B - Q,\,\,\,C - R\,\,\,D - S\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369947 A mild steel wire of length \(2\;L\) and crosssectional area A is stretched well within elastic limit, horizontally between two pillars as shown in figure. A mass \(m\) is suspended from the mid point of the wire. Strain in the wire is
supporting img

1 \(\dfrac{x^{2}}{2 L^{2}}\)
2 \(\dfrac{x}{L}\)
3 \(\dfrac{x^{2}}{L}\)
4 \(\dfrac{x^{2}}{2 L}\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369948 If the angle of shear is \(30^{\circ}\) for a cubical body and the change in length is \(250\;cm,\) then the original length of cube is

1 \(4.9\;m\)
2 \(5.5\;m\)
3 \(5.3\;m\)
4 \(4.3\;m\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369949 A man grows into a giant such that his linear dimensions increase by a factor of 9 . Assuming that his density remains same, the stress in the leg will change by a factor of :

1 \(\dfrac{1}{9}\)
2 81
3 9
4 \(\dfrac{1}{81}\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369950 Match the Column I (stress) with Column II (characteristic) and select the correct answer from the codes given below.
Column I
Column II
A
Longitudinal stress
P
Independent of area of cross-section of wire
B
Shear stress
Q
Change in pressure
C
Breaking stress
R
Length of wire increases or decreases
D
Bulk stress
S
Shape changes

1 \(A - R,\,\,\,B - S,\,\,\,C - Q\,\,\,D - P\)
2 \(A - S,\,\,\,B - R,\,\,\,C - P\,\,\,D - Q\)
3 \(A - R,\,\,\,B - S,\,\,\,C - P\,\,\,D - Q\)
4 \(A - P,\,\,\,B - Q,\,\,\,C - R\,\,\,D - S\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369947 A mild steel wire of length \(2\;L\) and crosssectional area A is stretched well within elastic limit, horizontally between two pillars as shown in figure. A mass \(m\) is suspended from the mid point of the wire. Strain in the wire is
supporting img

1 \(\dfrac{x^{2}}{2 L^{2}}\)
2 \(\dfrac{x}{L}\)
3 \(\dfrac{x^{2}}{L}\)
4 \(\dfrac{x^{2}}{2 L}\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369948 If the angle of shear is \(30^{\circ}\) for a cubical body and the change in length is \(250\;cm,\) then the original length of cube is

1 \(4.9\;m\)
2 \(5.5\;m\)
3 \(5.3\;m\)
4 \(4.3\;m\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369949 A man grows into a giant such that his linear dimensions increase by a factor of 9 . Assuming that his density remains same, the stress in the leg will change by a factor of :

1 \(\dfrac{1}{9}\)
2 81
3 9
4 \(\dfrac{1}{81}\)
PHXI09:MECHANICAL PROPERTIES OF SOLIDS

369950 Match the Column I (stress) with Column II (characteristic) and select the correct answer from the codes given below.
Column I
Column II
A
Longitudinal stress
P
Independent of area of cross-section of wire
B
Shear stress
Q
Change in pressure
C
Breaking stress
R
Length of wire increases or decreases
D
Bulk stress
S
Shape changes

1 \(A - R,\,\,\,B - S,\,\,\,C - Q\,\,\,D - P\)
2 \(A - S,\,\,\,B - R,\,\,\,C - P\,\,\,D - Q\)
3 \(A - R,\,\,\,B - S,\,\,\,C - P\,\,\,D - Q\)
4 \(A - P,\,\,\,B - Q,\,\,\,C - R\,\,\,D - S\)