01. Young's Modulus and Bulk Modulus and Change in Length
« Previous Topic: 00. Elasticity, Stress, Strain and Hooke's law Next Topic: 02. Poisson’s Ratio, Modulus of Rigidity »
Join With Us for More Updates
Mechanical Properties of Solids

140954 Two wires made of same material are clamped rigidly at one end and pulled by the same force on the other end. The length and the radius of the first wire are three times those of the second wire. If $x$ is the increase in the length of the first wire, then the increase in the length of the second wire is

1 $\frac{1}{3} \mathrm{x}$
2 $3 \mathrm{x}$
3 $9 \mathrm{x}$
4 $\sqrt{3} \mathrm{x}$
Shift-I]
Mechanical Properties of Solids

140955 A rubber band catapult has initial length $2 \mathrm{~cm}$ and cross-sectional area $5 \mathrm{~mm}^{2}$. It is stretched to $\mathbf{2 c m}$ and then released to project a stone of mass of $20 \mathrm{~g}$. The velocity of projected stone is (Young's modulus of rubber $=5 \times 10^{8} \mathrm{Nm}^{-2}$ )

1 $20 \mathrm{~ms}^{-1}$
2 $50 \mathrm{~ms}^{-1}$
3 $100 \mathrm{~ms}^{-1}$
4 $250 \mathrm{~ms}^{-1}$
Shift-I]
Mechanical Properties of Solids

140956 The elastic limit of a metal is $\frac{400}{\pi} \mathrm{MPa}$. If a rod of this metal is to support a $484 \mathrm{~N}$ load without exceeding its elastic limit, the minimum diameter of the rod is

1 $2.2 \mathrm{~mm}$
2 $1.2 \mathrm{~mm}$
3 $2 \mathrm{~mm}$
4 $16 \mathrm{~mm}$
Shift-I]
Mechanical Properties of Solids

140957 A metal cube has an edge length of $90 \mathrm{~cm}$. If $2 \times 10^{9} \mathrm{~N} / \mathrm{m}^{2}$ of pressure (or stress) is required to reduce the edge length to $89.5 \mathrm{~cm}$, then the bulk modulus of the metal is

1 $1 \times 10^{11} \mathrm{Nm}^{-2}$
2 $2.5 \times 10^{10} \mathrm{Nm}^{-2}$
3 $9 \times 10^{11} \mathrm{Nm}^{-2}$
4 $1.2 \times 10^{11} \mathrm{Nm}^{-2}$
Shift-II]
For More Updates join with Us
NEET Test Series from KOTA - 10 Papers In MS WORD WhatsApp Here
Mechanical Properties of Solids

140954 Two wires made of same material are clamped rigidly at one end and pulled by the same force on the other end. The length and the radius of the first wire are three times those of the second wire. If $x$ is the increase in the length of the first wire, then the increase in the length of the second wire is

1 $\frac{1}{3} \mathrm{x}$
2 $3 \mathrm{x}$
3 $9 \mathrm{x}$
4 $\sqrt{3} \mathrm{x}$
Shift-I]
Mechanical Properties of Solids

140955 A rubber band catapult has initial length $2 \mathrm{~cm}$ and cross-sectional area $5 \mathrm{~mm}^{2}$. It is stretched to $\mathbf{2 c m}$ and then released to project a stone of mass of $20 \mathrm{~g}$. The velocity of projected stone is (Young's modulus of rubber $=5 \times 10^{8} \mathrm{Nm}^{-2}$ )

1 $20 \mathrm{~ms}^{-1}$
2 $50 \mathrm{~ms}^{-1}$
3 $100 \mathrm{~ms}^{-1}$
4 $250 \mathrm{~ms}^{-1}$
Shift-I]
Mechanical Properties of Solids

140956 The elastic limit of a metal is $\frac{400}{\pi} \mathrm{MPa}$. If a rod of this metal is to support a $484 \mathrm{~N}$ load without exceeding its elastic limit, the minimum diameter of the rod is

1 $2.2 \mathrm{~mm}$
2 $1.2 \mathrm{~mm}$
3 $2 \mathrm{~mm}$
4 $16 \mathrm{~mm}$
Shift-I]
Mechanical Properties of Solids

140957 A metal cube has an edge length of $90 \mathrm{~cm}$. If $2 \times 10^{9} \mathrm{~N} / \mathrm{m}^{2}$ of pressure (or stress) is required to reduce the edge length to $89.5 \mathrm{~cm}$, then the bulk modulus of the metal is

1 $1 \times 10^{11} \mathrm{Nm}^{-2}$
2 $2.5 \times 10^{10} \mathrm{Nm}^{-2}$
3 $9 \times 10^{11} \mathrm{Nm}^{-2}$
4 $1.2 \times 10^{11} \mathrm{Nm}^{-2}$
Shift-II]
NEET DIGITAL LIBRARY
Mechanical Properties of Solids

140954 Two wires made of same material are clamped rigidly at one end and pulled by the same force on the other end. The length and the radius of the first wire are three times those of the second wire. If $x$ is the increase in the length of the first wire, then the increase in the length of the second wire is

1 $\frac{1}{3} \mathrm{x}$
2 $3 \mathrm{x}$
3 $9 \mathrm{x}$
4 $\sqrt{3} \mathrm{x}$
Shift-I]
Mechanical Properties of Solids

140955 A rubber band catapult has initial length $2 \mathrm{~cm}$ and cross-sectional area $5 \mathrm{~mm}^{2}$. It is stretched to $\mathbf{2 c m}$ and then released to project a stone of mass of $20 \mathrm{~g}$. The velocity of projected stone is (Young's modulus of rubber $=5 \times 10^{8} \mathrm{Nm}^{-2}$ )

1 $20 \mathrm{~ms}^{-1}$
2 $50 \mathrm{~ms}^{-1}$
3 $100 \mathrm{~ms}^{-1}$
4 $250 \mathrm{~ms}^{-1}$
Shift-I]
Mechanical Properties of Solids

140956 The elastic limit of a metal is $\frac{400}{\pi} \mathrm{MPa}$. If a rod of this metal is to support a $484 \mathrm{~N}$ load without exceeding its elastic limit, the minimum diameter of the rod is

1 $2.2 \mathrm{~mm}$
2 $1.2 \mathrm{~mm}$
3 $2 \mathrm{~mm}$
4 $16 \mathrm{~mm}$
Shift-I]
Mechanical Properties of Solids

140957 A metal cube has an edge length of $90 \mathrm{~cm}$. If $2 \times 10^{9} \mathrm{~N} / \mathrm{m}^{2}$ of pressure (or stress) is required to reduce the edge length to $89.5 \mathrm{~cm}$, then the bulk modulus of the metal is

1 $1 \times 10^{11} \mathrm{Nm}^{-2}$
2 $2.5 \times 10^{10} \mathrm{Nm}^{-2}$
3 $9 \times 10^{11} \mathrm{Nm}^{-2}$
4 $1.2 \times 10^{11} \mathrm{Nm}^{-2}$
Shift-II]
Join With Us for More Updates
Mechanical Properties of Solids

140954 Two wires made of same material are clamped rigidly at one end and pulled by the same force on the other end. The length and the radius of the first wire are three times those of the second wire. If $x$ is the increase in the length of the first wire, then the increase in the length of the second wire is

1 $\frac{1}{3} \mathrm{x}$
2 $3 \mathrm{x}$
3 $9 \mathrm{x}$
4 $\sqrt{3} \mathrm{x}$
Shift-I]
Mechanical Properties of Solids

140955 A rubber band catapult has initial length $2 \mathrm{~cm}$ and cross-sectional area $5 \mathrm{~mm}^{2}$. It is stretched to $\mathbf{2 c m}$ and then released to project a stone of mass of $20 \mathrm{~g}$. The velocity of projected stone is (Young's modulus of rubber $=5 \times 10^{8} \mathrm{Nm}^{-2}$ )

1 $20 \mathrm{~ms}^{-1}$
2 $50 \mathrm{~ms}^{-1}$
3 $100 \mathrm{~ms}^{-1}$
4 $250 \mathrm{~ms}^{-1}$
Shift-I]
Mechanical Properties of Solids

140956 The elastic limit of a metal is $\frac{400}{\pi} \mathrm{MPa}$. If a rod of this metal is to support a $484 \mathrm{~N}$ load without exceeding its elastic limit, the minimum diameter of the rod is

1 $2.2 \mathrm{~mm}$
2 $1.2 \mathrm{~mm}$
3 $2 \mathrm{~mm}$
4 $16 \mathrm{~mm}$
Shift-I]
Mechanical Properties of Solids

140957 A metal cube has an edge length of $90 \mathrm{~cm}$. If $2 \times 10^{9} \mathrm{~N} / \mathrm{m}^{2}$ of pressure (or stress) is required to reduce the edge length to $89.5 \mathrm{~cm}$, then the bulk modulus of the metal is

1 $1 \times 10^{11} \mathrm{Nm}^{-2}$
2 $2.5 \times 10^{10} \mathrm{Nm}^{-2}$
3 $9 \times 10^{11} \mathrm{Nm}^{-2}$
4 $1.2 \times 10^{11} \mathrm{Nm}^{-2}$
Shift-II]
For More Updates join with Us