Superposition of Transverse Waves
PHXI15:WAVES

355100 A sonometer wire resonates with a given tuning fork forming five antinodes in the presence of mass 9kg. When this mass is replaced by a mass M, the wire resonates with the same tuning fork forming three antinodes for the same positions of the bridges. The value of M is:

1 25kg
2 5kg
3 12.5kg
4 (1/25)kg
PHXI15:WAVES

355101 A sonometer wire of length 114cm fixed at both the ends. Where should the two bridges be placed so as to divide the wire into three segments whose fundamental frequencies are in the ratio 1:3:4 ?

1 At 36cm and 84cm from one end
2 At 24cm and 72cm from one end
3 At 48cm and 96cm from one end
4 At 72cm and 96cm) from one end
PHXI15:WAVES

355102 The given diagram shows three light pieces of paper placed on a wire that is stretched over two supports, Q and R, a distance 4x apart. When the wire is made to vibrate at a particular frequency, all the pieces of paper, except the middle one, fall off the wire. Which of the following could be the wavelength of the vibration?
supporting img

1 2x
2 3x
3 4x
4 8x
PHXI15:WAVES

355103 A brick is hung from a sonometer wire. If the brick is immersed in oil, then frequency of the wire will

1 Increase due to buoyancy
2 Decrease
3 Remains unchanged
4 Increase due to viscosity of oil
PHXI15:WAVES

355104 The total length of a sonometer wire between fixed ends is 110cm. Two bridges are placed to divide the length of wire in ratio 6:3:2. The tension in the wire is 400N and the mass per unit length is 0.01kg/m. What is the minimum common frequency with which three parts can vibrate?

1 166Hz
2 1000Hz
3 1100Hz
4 100Hz
PHXI15:WAVES

355100 A sonometer wire resonates with a given tuning fork forming five antinodes in the presence of mass 9kg. When this mass is replaced by a mass M, the wire resonates with the same tuning fork forming three antinodes for the same positions of the bridges. The value of M is:

1 25kg
2 5kg
3 12.5kg
4 (1/25)kg
PHXI15:WAVES

355101 A sonometer wire of length 114cm fixed at both the ends. Where should the two bridges be placed so as to divide the wire into three segments whose fundamental frequencies are in the ratio 1:3:4 ?

1 At 36cm and 84cm from one end
2 At 24cm and 72cm from one end
3 At 48cm and 96cm from one end
4 At 72cm and 96cm) from one end
PHXI15:WAVES

355102 The given diagram shows three light pieces of paper placed on a wire that is stretched over two supports, Q and R, a distance 4x apart. When the wire is made to vibrate at a particular frequency, all the pieces of paper, except the middle one, fall off the wire. Which of the following could be the wavelength of the vibration?
supporting img

1 2x
2 3x
3 4x
4 8x
PHXI15:WAVES

355103 A brick is hung from a sonometer wire. If the brick is immersed in oil, then frequency of the wire will

1 Increase due to buoyancy
2 Decrease
3 Remains unchanged
4 Increase due to viscosity of oil
PHXI15:WAVES

355104 The total length of a sonometer wire between fixed ends is 110cm. Two bridges are placed to divide the length of wire in ratio 6:3:2. The tension in the wire is 400N and the mass per unit length is 0.01kg/m. What is the minimum common frequency with which three parts can vibrate?

1 166Hz
2 1000Hz
3 1100Hz
4 100Hz
NEET Test Series from KOTA - 10 Papers In MS WORD WhatsApp Here
PHXI15:WAVES

355100 A sonometer wire resonates with a given tuning fork forming five antinodes in the presence of mass 9kg. When this mass is replaced by a mass M, the wire resonates with the same tuning fork forming three antinodes for the same positions of the bridges. The value of M is:

1 25kg
2 5kg
3 12.5kg
4 (1/25)kg
PHXI15:WAVES

355101 A sonometer wire of length 114cm fixed at both the ends. Where should the two bridges be placed so as to divide the wire into three segments whose fundamental frequencies are in the ratio 1:3:4 ?

1 At 36cm and 84cm from one end
2 At 24cm and 72cm from one end
3 At 48cm and 96cm from one end
4 At 72cm and 96cm) from one end
PHXI15:WAVES

355102 The given diagram shows three light pieces of paper placed on a wire that is stretched over two supports, Q and R, a distance 4x apart. When the wire is made to vibrate at a particular frequency, all the pieces of paper, except the middle one, fall off the wire. Which of the following could be the wavelength of the vibration?
supporting img

1 2x
2 3x
3 4x
4 8x
PHXI15:WAVES

355103 A brick is hung from a sonometer wire. If the brick is immersed in oil, then frequency of the wire will

1 Increase due to buoyancy
2 Decrease
3 Remains unchanged
4 Increase due to viscosity of oil
PHXI15:WAVES

355104 The total length of a sonometer wire between fixed ends is 110cm. Two bridges are placed to divide the length of wire in ratio 6:3:2. The tension in the wire is 400N and the mass per unit length is 0.01kg/m. What is the minimum common frequency with which three parts can vibrate?

1 166Hz
2 1000Hz
3 1100Hz
4 100Hz
PHXI15:WAVES

355100 A sonometer wire resonates with a given tuning fork forming five antinodes in the presence of mass 9kg. When this mass is replaced by a mass M, the wire resonates with the same tuning fork forming three antinodes for the same positions of the bridges. The value of M is:

1 25kg
2 5kg
3 12.5kg
4 (1/25)kg
PHXI15:WAVES

355101 A sonometer wire of length 114cm fixed at both the ends. Where should the two bridges be placed so as to divide the wire into three segments whose fundamental frequencies are in the ratio 1:3:4 ?

1 At 36cm and 84cm from one end
2 At 24cm and 72cm from one end
3 At 48cm and 96cm from one end
4 At 72cm and 96cm) from one end
PHXI15:WAVES

355102 The given diagram shows three light pieces of paper placed on a wire that is stretched over two supports, Q and R, a distance 4x apart. When the wire is made to vibrate at a particular frequency, all the pieces of paper, except the middle one, fall off the wire. Which of the following could be the wavelength of the vibration?
supporting img

1 2x
2 3x
3 4x
4 8x
PHXI15:WAVES

355103 A brick is hung from a sonometer wire. If the brick is immersed in oil, then frequency of the wire will

1 Increase due to buoyancy
2 Decrease
3 Remains unchanged
4 Increase due to viscosity of oil
PHXI15:WAVES

355104 The total length of a sonometer wire between fixed ends is 110cm. Two bridges are placed to divide the length of wire in ratio 6:3:2. The tension in the wire is 400N and the mass per unit length is 0.01kg/m. What is the minimum common frequency with which three parts can vibrate?

1 166Hz
2 1000Hz
3 1100Hz
4 100Hz
PHXI15:WAVES

355100 A sonometer wire resonates with a given tuning fork forming five antinodes in the presence of mass 9kg. When this mass is replaced by a mass M, the wire resonates with the same tuning fork forming three antinodes for the same positions of the bridges. The value of M is:

1 25kg
2 5kg
3 12.5kg
4 (1/25)kg
PHXI15:WAVES

355101 A sonometer wire of length 114cm fixed at both the ends. Where should the two bridges be placed so as to divide the wire into three segments whose fundamental frequencies are in the ratio 1:3:4 ?

1 At 36cm and 84cm from one end
2 At 24cm and 72cm from one end
3 At 48cm and 96cm from one end
4 At 72cm and 96cm) from one end
PHXI15:WAVES

355102 The given diagram shows three light pieces of paper placed on a wire that is stretched over two supports, Q and R, a distance 4x apart. When the wire is made to vibrate at a particular frequency, all the pieces of paper, except the middle one, fall off the wire. Which of the following could be the wavelength of the vibration?
supporting img

1 2x
2 3x
3 4x
4 8x
PHXI15:WAVES

355103 A brick is hung from a sonometer wire. If the brick is immersed in oil, then frequency of the wire will

1 Increase due to buoyancy
2 Decrease
3 Remains unchanged
4 Increase due to viscosity of oil
PHXI15:WAVES

355104 The total length of a sonometer wire between fixed ends is 110cm. Two bridges are placed to divide the length of wire in ratio 6:3:2. The tension in the wire is 400N and the mass per unit length is 0.01kg/m. What is the minimum common frequency with which three parts can vibrate?

1 166Hz
2 1000Hz
3 1100Hz
4 100Hz